Loler Inspection & Testing – Loler Checks

The Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) are essential in guaranteeing that lifting equipment is fit for purpose to guard you and your employees against harm.

What does LOLER stand for?

These days health and safety regulations are taken very earnestly in most companies. Even in office-based roles, there is standard health and safety training to stop injuries and lawsuits from happening. In industries where there is a more increased risk of injuries, it is even more essential. This is where LOLER comes in.

LOLER stands for Lifting Operations and Lifting Equipment Regulations (1998); it guides to the ongoing inspections of lifting equipment and lifting operations for companies that make use of the mechanical equipment for production. It is not sufficient to consider new equipment is fault-free; it must be inspected and verified that it’s secure to use.

New equipment isn’t always free from imperfections, even if it has a ten-year guarantee and it has only just arrived from the factory. Beliefs like this can easily guide to severe injury or death. LOLER inspections assure that equipment operating both new and old isn’t compromised and is secure to operate. Periodic inspections test various aspects of equipment and minimize the risks where practicable.

What is a LOLER Checks or Loler Inspection Checks?

The regulations are listed below.

LOLER covers:

  • Lifting operation.
  • Equipment selection.
  • Lifting equipment.
  • Marking lifting equipment.
  • The planning of lifting operations.

Keeping the equipment and guaranteeing that it is viable for use means more than merely checking the mechanisms. LOLER also examines the surrounding areas and the protocol for utilizing the equipment.

Areas of usage that are also examined by LOLER and come under LOLER, therefore, extend to:

  • Strength and stability.
  • Usage of equipment.
  • Setting and installing.
  • Organization of lifting operations.
  • Labeling lifting equipment.
  • Equipment for lifting people
  • Suspended loads.
  • Attaching, detaching, and securing loads.
  • Storage.

The LOLER inspections should be taken out every 6 to 12 months, relying on the equipment. If you are uncertain about your LOLER status, or you need more information about inspections for your equipment, contact Loler Inspection Certification provider.

Who is responsible for LOLER inspections?

Eventually, the owners of the company and the equipment are liable for guaranteeing that equipment has its legal safety inspections carried out at needed intervals. Whoever the equipment is registered to will be the keeper of it and liable for its proper maintenance and function. In the case that this falls to a company and not a person, the obligation would be transferred to the CEO or the company owner.

A LOLER inspection on equipment used for manufacturing is a permitted requirement that owners must recognize and stick to. Proper record-keeping is also essential, which will be checked during the LOLER inspection.

Owners that fail to yield with the protocol for LOLER inspections will not only put their staff and workers at risk but they could also discover themselves in legal hot water. This is summarized in the Health and Safety at Work and the Lifting Operations and Lifting Equipment Regulations (1998) (LOLER).

The proprietors and operators of the equipment who are liable for the LOLER certificates are also liable for the training of staff to operate the machines responsibly and the supervision of the machines to maintain them in an operable state. All of this obligation falls on the shoulders of owners and operators of lifting equipment and mechanical equipment.

What are the different levels of inspection?

Following the initial LOLER inspection brought out by a LOLER examiner, companies and operators are accountable for carrying out their own inspections on the equipment and the site at periodic intervals. This guarantees the ongoing safety of the equipment and the secure use of the equipment as well.
There are two levels of inspection that must be taken out by operating staff and competent employees.

These are:

  • Pre-use Checks – Standard checks taken out on lifting equipment before each use.
  • Thorough Examinations – These are executed by the employer or a competent person within the company at frequent intervals.

The regular intervals for LOLER inspections are:

  • Before using it for the first time.
  • After assembly and before use at each site.
  • Regularly, while in service.
  • Following special circumstances.


Equipment that needs a LOLER inspection includes:

  • Passenger lifts
  • Goods lifts
  • Dumb waiters
  • Escalators
  • Cherry pickers
  • Scissor lifts


Contact Leading Digital Inspection and Testing Certificate provider ( Zertify) like Spinnsol who can advise or organize for your lift to be examined by an accredited inspector.

Notify of
Inline Feedbacks
View all comments
Share via
Copy link